Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
vii
Conditions specific to AB-Access Extender:
AB-Access Extender complies with Part 15 of the FCC rules. The device is specifically designed
to be used under Part 15, Sub-part E of the FCC rules and regulations. Operation is subject to
following conditions:
• The device to utilize a fixed mount antenna, for use on a permanent outdoor structure.
• The device to be installed by qualified installation/deployment personnel, and a minimum of
1.5 meters of separation must exist between the device and persons, when the device is
operating.
• The device installers and operators should be aware of the transmitter operating conditions,
specified in the AB-Extender installation manual and other associated user documentation, as
well as the antenna co-location requirements of Part 1.1307 (b) (3), of FCC rules, pertaining
to RF exposure.
• The device may not cause harmful interference.
• The device must accept interference received, including interference that may cause
undesired operation.
The device is intended to be used only when installed in accordance with instructions outlined in
this manual. Failure to comply with these instructions may void the user's authority to operate
this device and/or the manufacturer's warranty. Furthermore, any unauthorized modification or
changes to this device without the express approval of Adaptive Broadband Corporation may
also void the user's authority to operate this device.