Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
6-11
Figure 6-13 Interconnect Cable Installation to Outdoor AB-Access Extender - Bottom
View
TBD: Update this section for AB-Access Extender – insert graphic for AB-Access Extender
bottom view with cable routing
6.6.2.3 Installing The Interconnect Cables to Access Panel
Attention! Always Disconnect Power from wall box BEFORE inserting RJ-45 connector
into transceiver. This prevents arcing damage from occurring.
3. Install an RJ-45 connector to the junction box end of the cable, following the previous steps 6
through 12.
4. Plug the RJ-45 into one of the upper ports in the Access Panel junction box.
Figure 6-14 Access Panel showing Connections to AP/EX
RJ-45 to
AP/EX
Transceiver
GND