Installation Manual Part 1

Company Proprietary

Adaptive Broadband

U-NII Product Installation Manual 05/29/2001

6-9

Figure 6-11 Outdoor Transceiver End of the Interconnect Cable with Cable Preparation

Figure 6-12 Outdoor Transceiver End of the Interconnect Cable with Shielding

6. Separate the twisted pair wires and align by color code in the order listed in the following

Table 6-3.

Grommet

clamping

plate

Note direction

of taper

Insert wire

into channels

1/2"

3/8"

Shielding

Pin 1

Tab on

underside

1" square tinned copper foil - wrap the copper foil around the

shield/braid and sheath with the left

edge aligned with the edge of the braid.

Grommet is

conductive

and used to

complete

the ground