Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
6-6
Figure 6-6 Mounting Parts for an Outdoor AB-Access Extender
6. Place the outdoor AB-Access Extender on the mounting pole.
7. Align the pole clamp with the mounting holes.
8. Insert the mounting screws and hand tighten.
9. Rotate the outdoor AB-Access Extender so it is pointing in the correct direction.
10. Tighten the mounting screws.
TBD: Update this section for AB-Access Extender – photo of rear of Extender
Figure 6-7 AB-Access Extender Rear View
Figure 6-8 Tilt Bracket
TBD: Update this section for AB-Access Extender – insert photo of correct tilt bracket for
Extender
Figure 6-9 AB-Access Extender with Mounted Tilt Bracket
Side Hex
Bolts
Tilt Bracket