Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
6-5
Figure 6-4 Mounting Pole Installation
6.5.5 Installing On A Wall With Wood Siding
6. Place the mounting plate against the wall.
7. Using a level, be sure that the mounting pole is perpendicular to the ground. You may need
to use spacers, as shown in Figure 6-6.
8. Mark the hole locations for the drilled hole locations. Remove the mounting pole and set
aside.
9. Drill 1/8-inch holes in the places marked.
10. Use #10 or #12 wood screws to secure the mounting pole to the wall and tighten.
Figure 6-5 Mounting Pole on Clapboard Siding
6.6 Mounting The Outdoor AB-Access Extender
Now that you have installed the mounting pole, you are ready to install the AB-Access Extender
onto the mounting poles. Reference Figures 6-7 through 6-10.
TBD: Update this section for AB-Access Extender – image of extender on mounting