Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
5-11
Figure 5-14 Interconnect Cable Installation to Outdoor Access Point - Bottom View
5.6.2.3 Installing The Interconnect Cables to Access Panel
Attention! Always Disconnect Power from wall box BEFORE inserting RJ-45 connector
into transceiver. This prevents arcing damage from occurring.
1. Install an RJ-45 connector to the junction box end of the cable, following the previous steps 6
through 12.
2. Plug the RJ-45 into one of the upper ports in the Access Panel junction box.
Figure 5-15 Access Panel showing Connections to Access Point
RJ-45 to
Access Point
Transceiver
GND