Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
5-6
5.6 Mounting The Outdoor Access Points
Now that you have installed the mounting pole, you are ready to install the Access Points onto
the mounting poles. Reference Figures 5-7 through 5-10.
Figure 5-7 Mounting Parts for an Outdoor Access Point
1. Place the outdoor Access Point on the mounting pole.
2. Align the pole clamp with the mounting holes.
3. Insert the mounting screws and hand tighten.
4. Rotate the outdoor Access Point so it is pointing in the correct direction.
5. Tighten the mounting screws.
Figure 5-8 Access Point Rear View
Serial
Number
Pole Brace
MAC ADdress
(underside)
Hex Bolts (2)