Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
5-3
Figure 5-2 Outdoor Access Point Components
5.4 Indoor Patch Panel
Figure 5-3 shows the Base Station Access Panel used as an indoor patch panel.
Figure 5-3 Access Panel used as Patch Panel
5.5 Installing The Equipment
This section explains how to install an AP transceiver onto a variety of surfaces, connect them to
the indoor junction box, and ground the system. The most likely scenario is to install six
transceivers on a single tower or mast 60 degrees apart.
AP OUT
AP IN