Installation Manual Part 1

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
1-5
Table 1-1 Supported AB-Access SU Configurations
============================================
Configuration Protocol AP role System Mode Interface
------------------------------------------------------------------------------------------
1 CLIP terminated static Ethernet
2 CLIP terminated interactive Ethernet
2 RFC1483 terminated interactive Ethernet
2 RFC1483 switched interactive Ethernet
4 PPP switched interactive Ethernet
3 CLIP terminated installation Ethernet
3 RFC1483 terminated installation Ethernet
3 RFC1483 switched installation Ethernet
5 PPP switched installation Ethernet
Table 1-2 Supported AB-Access AP Configurations
============================================
Configuration Protocol AP Role System Mode Interface
------------------------------------------------------------------------------------------
1 CLIP terminated static ATM
2 CLIP terminated interactive ATM
3 RFC1483 terminated interactive Ethernet
2 RFC1483 switched interactive ATM
2 PPP switched interactive ATM
4 CLIP terminated static Ethernet
The first column in the Tables above refers to a configuration number. This number will be used
as a parameter to the upgrade process. The second column identifies the protocol or network
topology. Routed topologies will use the CLIP protocol, bridged will use the RFC1483 protocol,