User's Manual

AxxceLTE eNodeB

Installation Guide v1.0 - 12 -

Figure 4.2 – eNodeB Wall mount

4.1 Grounding

It is required to properly ground the eNodeB. To do this, a ground lug is provided as a

convenient attachment point to the facility grounding plane/grid. It is located on the

bottom seam of the case, labelled with the following mark:

4.2 Sun Shield

AxxceLTE outdoor products are delivered with a sun shield that can be mounted to either

face of the unit using the (4) mounting blocks. The sun shield covers the top, the two

narrow sides, and one face of the unit. The sun shield is delivered with (4) bolts, washers

and locking washers to mount to the face of the unit. Also, (4) mounting extension bolts

are provided for the case that the sun shield needs to be attached to the same face of the

unit as the mounting brace.