User's Manual
Table Of Contents
- 1 Preface
- 2 AB-MAX Product Overview
- 3 Pre-Installation
- 4 Installing the Mounting Poles
- 5 Radio Installation
- 6 Installing the Interconnect Cables
- 7 Grounding the System
- 8 Installing the NIA/Power Adapter Hookup
- 9.0 Configuring the ABMAX Access Point Base Station
- Appendix A: Glossary of Terms and Abbreviations
ABMAX ACCESS POINT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1
25
OF 39
5) Remove one of the lower mounting screws of the mounting pole. Insert a screw through the
grounding lug terminal and re-install it to the mounting pole.
6) Attach the grounding wire to the clamp on the grounding rod, reference Figure 7-2. If
necessary, use wire staples to secure the grounding wire to the outside wall.
Figure 7-2 Mounting Pole with Ground Lug
7) Install a grounding wire from the wallbox to the grounding rod.