User's Manual
Table Of Contents
- 1.0 Preface
- 2.0 Introduction
- 3.0 Installation
- 3.1 Compliance Alert - Operation in the 3.4 - 3.6 GHz Band
- 3.2 Operation in the 3.650 - 3.675 GHz Band
- 3.3 Installation Warnings
- 3.4 Environmental Cautions
- 3.5 Installing Outdoor Equipment
- 3.6 Installing an Optional Sector Antenna
- 3.7 Installing Optional Omnidirectional Antenna
- 3.8 Installing the Access Point
- 3.9 Power and Data Connections - AC and DC Power Options
- 4.0 Configuring an Access Point for Single-Channel Use
- 5.0 Maintenance Guide
- Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-L
- Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)
- Appendix C: Glossary of Terms and Abbreviations
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
54
OF 65
4.1.4 Configuring System Information Settings
Follow this procedure to configure the System Information settings.
1) Select Sy
stem from the menu list.
2) When the System Information screen (Figure 4-4:) appears, enter the System Name,
Location, and Contact information in the appropriate fields.
Figure 4-4: Configuring System Information Settings
3) Click Apply to accept the entries.
4) If the current information needs to be changed, then enter the new information in the
appropriate fields and click Apply.
Note
Access Points with the same Location name will be placed into the same cell on the
Axxcelera NMS.
N