User's Manual
Table Of Contents
- 1.0 Preface
- 2.0 Introduction
- 3.0 Installation
- 3.1 Compliance Alert - Operation in the 3.4 - 3.6 GHz Band
- 3.2 Operation in the 3.650 - 3.675 GHz Band
- 3.3 Installation Warnings
- 3.4 Environmental Cautions
- 3.5 Installing Outdoor Equipment
- 3.6 Installing an Optional Sector Antenna
- 3.7 Installing Optional Omnidirectional Antenna
- 3.8 Installing the Access Point
- 3.9 Power and Data Connections - AC and DC Power Options
- 4.0 Configuring an Access Point for Single-Channel Use
- 5.0 Maintenance Guide
- Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-L
- Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)
- Appendix C: Glossary of Terms and Abbreviations
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
53
OF 65
4.1.3 Configuring IP Address Settings
Follow this procedure to configure the IP Address settings.
1) Select IP Address from the menu list.
2) When the IP Address screen (Figure 4-3:) appears, in the Edit Settings fields enter the
appropriate IP Address, Subnet Mask, and Gateway addresses.
Figure 4-3: Configuring the IP Address
3) Click Apply to accept the addresses. The Current Settings will display the address values.
4) If the current addresses need to be changed, then enter new addresses in the Edit Settings
fields and click Apply.