User's Manual
Table Of Contents
- 1.0 Preface
- 2.0 Introduction
- 3.0 Installation
- 3.1 Compliance Alert - Operation in the 3.4 - 3.6 GHz Band
- 3.2 Operation in the 3.650 - 3.675 GHz Band
- 3.3 Installation Warnings
- 3.4 Environmental Cautions
- 3.5 Installing Outdoor Equipment
- 3.6 Installing an Optional Sector Antenna
- 3.7 Installing Optional Omnidirectional Antenna
- 3.8 Installing the Access Point
- 3.9 Power and Data Connections - AC and DC Power Options
- 4.0 Configuring an Access Point for Single-Channel Use
- 5.0 Maintenance Guide
- Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-L
- Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)
- Appendix C: Glossary of Terms and Abbreviations
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
50
OF 65
4.0 Configuring an Access Point for Single-Channel Use
Using the Access Point setup screens, follow the procedure below to configure a single-channel
Access Point.
The following topics cover configuring an Acce
ss Point for single-channel use.
• Logging into the Access Point Web Page
• Configuring IP Address Settings
• Configuring System Information Settings
• Completing Access Point Setup
Note
Where dynamic frequency selection (DFS) is
not required, the Access Point will only
support a single-channel configuration.
N