User's Manual
Table Of Contents
- 1.0 Preface
- 2.0 Introduction
- 3.0 Installation
- 3.1 Compliance Alert - Operation in the 3.4 - 3.6 GHz Band
- 3.2 Operation in the 3.650 - 3.675 GHz Band
- 3.3 Installation Warnings
- 3.4 Environmental Cautions
- 3.5 Installing Outdoor Equipment
- 3.6 Installing an Optional Sector Antenna
- 3.7 Installing Optional Omnidirectional Antenna
- 3.8 Installing the Access Point
- 3.9 Power and Data Connections - AC and DC Power Options
- 4.0 Configuring an Access Point for Single-Channel Use
- 5.0 Maintenance Guide
- Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-L
- Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)
- Appendix C: Glossary of Terms and Abbreviations
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
41
OF 65
3.9.1 AC PSU/NIA Option
3.9.1.1 Connecting the Access Point to the AC Power Supply/NIA
The following procedures will guide you through the connection of the AC PSU/NIA unit:
1) Rem
ove the new AC PSU/NIA from the installation kit.
2) Using a shielded RJ-45 plug, terminate (attach plug) to the Access Point Cat-5 cable per the
manufacturer's recommended specifications for plug attachment. (Recommended
manufacturer: AMP P/N 5-569552).
3) Insert the RJ-45 plug from the outdoor Access Point into the RJ-45 receptacle, labeled
Data+Power, on the NIA (Figure 3-18:).
Figure 3-18: Connect the Access Point
Warning
It is extremely important to connect the AC power t
o the AC PSU/NIA as the last
step. Connecting AC power prematurely can damage the Access Point and lead to
faulty behavior.