User's Manual

Table Of Contents
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
18
OF 65
3.5 Installing Outdoor Equipment
3.5.1 Access Point Packing List
See “ExcelMAX Access Point Packing List” on page 9.
3.5.2 Sector Antenna Packing List
The following is included in the shipment of each sector antenna:
• 1 antenna
• 1 upper bracket
• 1 lower bracket
• 2 swing arms
• 2 clamps
• 4 M8X100 Hex Head bolts
• 6 M8X25 Hex Head bolts
• 10 M8 Flat washers
• 10 M8 Lock washers
3.5.3 Omnidirectional Antenna Packing List
• 1 Omni antenna
• 1 Omni antenna pole bracket
• 4 Worm drive clamps
• 2 M3 X 10MM socket head screws
• 2 M3 Lock washers
• 2 M3 Flat washers
3.5.4 Customer Supplied Equipment Required for Antenna Installation
The following is not supplied with the Access Point but is required for installation:
• Installation Collar Kit Axxcelera P/N 020-16300-0003, includes:
1 colla
r clamp
1 collar bracket with pin
2 nuts
• Box/open end wrench for M8
• Torque wrench (rated to 34 Nm [25 ft.-lb.])
• Ground Lug Ring Terminal Panduit LCB8-14-L or equivalent
3.5.5 Antenna Site Requirements
Basic installation locations should have been established at the initial site survey phase, before
equipment has been delivered.
1) V
erify that the elevation of the antennas can be sufficiently high to avoid obstructions and the
antennas will have a clear line of sight to the desired coverage area.