User Guide
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access
- RF Design and Planning
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 96 of 129
10 1483_T
The 1483_T configuration is where both the AP and the SU act as a layer 2 bridge. It is
important to understand that in this configuration data can only go from SU-AP & AP-SU within the
sector. Data will not be able to from SU-SU within the same sector. This can only be done by
connecting a router to the AP and redirecting that traffic back to the AP.
10.1
Static 1483_T
All assumptions for troubleshooting 1483_T will be based on the following diagram.
RL
BL
SL
E
RL
BL
SL
E
Ethernet HUB
PC
Router
192.168.3.1
192.168.3.34
192.168.3.10
192.168.3.9
MID 0
MID 3
LAN
PVC 768
AP/SU Management/Data Path