User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 60 of 129
7.1.2 SU Configuration Files
7.1.2.1 SU resolve
device add eth0 ether //edd mtu 1500 192.168.3.65
device add atm1 atm //bun mtu 1500 192.168.100.3
subnet add eth0.home . 192.168.3.64 ff:ff:ff:f8
subnet add atm1.home . 192.168.100.0 ff:ff:ff:00
rip send all none
rip accept all none
route add default 0.0.0.0 192.168.100.1 00:00:00:00 1 # MAN
relay all
ipatm lifetime 60
ipatm pvc atm1 atm25m 0/768 pcr 70000/70000 remoteip 192.168.100.1
7.1.2.2 SU system.conf
channel 0
antenna horizontal
mode static
mid 3
bid 0
interface eth0
duplex half
backoff 0
provider abw
key Axxcelera
mask 1ffff
leds active
7.1.3 Troubleshooting
7.1.3.1 Can’t ping the radio from the terrestrial interface
1. Check all physical connections. The radio is a network device, which means if you
connect it to a PC (NIC) you will use a straight-through cable. To connect the radio to a network