User Guide
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access
- RF Design and Planning
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 58 of 129
7 CLIP_T
The CLIP_T configuration is when both the AP and SU are setup as routers. This means that
when data arrives on any interface it is analyzed at layer 3 and based on the destination IP address is
forwarded out the proper interface.
7.1
Static CLIP_T Eth AP
All assumptions for troubleshooting Static CLIP_T Eth AP will be based on the following
diagram.
RL
BL
SL
E
RL
BL
SL
E
Ethernet Switch
PC
Router
192.168.2.33 /27
192.168.2.34 /27
192.168.100.3
192.168.3.65 /29
MID 0
MID 3
192.168.2.50 /27
PVC 768
LAN
SU Data/Management PVC
AP/SU Management/Data Path
192.168.100.1