User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 54 of 129
vci
{MID*256} The MID of the SU multiplied by 256.
port
{atm25m} Only the wireless port can be used for this device.
pcr-rx
{0-70000} Peak Cell Rate, used to define the maximum cells
arrival rate from the wireless interface (ATM cells per second).
pcr-tx
{0-70000} Peak Cell Rate, used to define the maximum cells
transmission rate at the wireless interface (ATM cells per second).
Example
The following example sets up a r1483 PVC to an AP from an SU with MID 3.
pvc 0/768 atm25m 70000 70000
6.6 initbridge
6.6.1 spanning
spanning mode
mode
{disable | enable} Currently spanning tree is not supported so
you must choose the disable option.
Example
The following example shows spanning tree disabled. Spanning tree is not supported at this
time.
spanning disable
6.6.2 device add
device add device
device {edd | mr1483 | r1483}
edd = Ethernet interface
mr1483 = multi-port 1483 bridge (AP only)
r1483 = single-port 1483 bridge (SU, Backhaul Master,
Backhaul Slave)
Example
The follow example adds the Ethernet interface to the bridge.