User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 53 of 129
6.4.1 floodmode
floodmode mode
mode {0 | 1}
0 = Flooding of unlearned unicast packets is disabled.
1 = Flooding of unlearned unicast packets is enabled.
Example
The following example configures the mr1483 device to forward all unlearned unicast
packets.
floodmode 1
6.4.2 up
up mid vci port pcr-rx pcr-tx
mid
{1-254} MID of the SU that the data will be sent to.
vci
{MID*256} The MID of the SU multiplied by 256.
port
{atm25m} Only the wireless port can be used for this device.
pcr-rx
{0-70000} Peak Cell Rate, used to define the maximum cells
passed per second.
pcr-tx
{0-70000} Peak Cell Rate, used to define the maximum cells
passed per second.
Example
The following example sets up a mr1483 PVC to an SU with MID 3.
up 3 768 atm25m 70000 70000
6.5 initr1483
Use this file only on SUs. The corresponding file for an AP is initmr1483.
6.5.1 pvc
pvc vpi/vci port pcr-rx pcr-tx
vpi
{0} Only VPI 0 is supported.