User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 52 of 129
sp default 256 stats
N
6.3.3 add
add iport ivpi ivci oport ovpi ovci tp sp type epd
iport
{atm25i | atm25m} In port of uni-directional PVC.
atm25i = terrestrial
atm25m = wireless
ivpi
{0-7} Currently only VPI 0 is supported on the wireless
interface. The terrestrial interface can use any in the range.
ivci
{32-65535} In port VCI.
oport
{atm25i | atm25m} Out port of the uni-directional PVC.
ovpi
{0-7} Currently only VPI 0 is supported on the wireless
interface. The terrestrial interface can use any in the range.
ovci
{32-65535} Out port VCI.
tp
{name} This is the name of the traffic parameter (previously set)
that applies to this PVC mapping.
sp
{name} This is the name of the switch parameter (previously
set) that applies to this PVC mapping.
type
{perm | soft | none} For all static configurations “perm” should
be used.
epd
{epd] Early Packet Discard will discard arriving cells when
buffering is below 32 cells.
Example
The following example shows a uni-directional PVC mapped from the terrestrial to wireless
port.
add atm25i 0 100 atm25m 0 256 default default perm epd
6.4 initmr1483
Use this file only on APs. The corresponding file for an SU is initr1483.