User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 48 of 129
6.2.10 key
key code
code
Text field that can hold up to 14 characters. This function is not
currently enabled.
Example
The following example shows an authentication key that is default. Units currently ignore
this field.
key Axxcelera
6.2.11 mask
mask mask#
mask#
{5 digit hex #} This is only used in an interactive system or
static channel scanning by using a non-zero BID. It prevents the radio
from scanning specific RF channels.
RF Channel Bit Map Table for Creating Mask#
Channel 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Binary Position Value 1 8 4 2 1 8 4 2 1 8 4 2 1 8 4 2 1
Decimal Value 1 15 15 15 15
Hexadecimal Value 1 f f f f
Decimal to Hexadecimal Conversion Table
Decimal 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Hex 0 1 2 3 4 5 6 7 8 9 a b c d e f
Example
The following example shows a unit that is masked to not scan channels 0-9 (Binary:
1:1111:1100:0000:0000 = Decimal: 1:15:12:0:0)
mask 1fc00