User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 46 of 129
Example
The following example shows a unit operating in a static mode, which means the unit is in a
stand alone mode.
mode static
6.2.4 mid
mid number
number
{0-254} Mobile ID is a unique identifier per radio in a sector.
MID 0 is always used for the AP, and can’t be used for an SU.
MID 255 is reserved and used as the broadcast MID. Also no MIDs can
be duplicated in a sector.
Example
The following example shows a AP’s mid.
mid 0
6.2.5 bid
bid number
number
{0-255} The BID (Basestation Identifier) is used identify static
scanning SUs with the correct AP. Meaning that the SU and AP must
have the same non zero BID in order for the SU to lock onto the APs
channel. A BID of 0 disables static channel scanning.
Example
The following example shows bid of 2.
bid 2
6.2.6 interface
interface type
type
{atm0 | eth0} Defines the interface type for the terrestrial
interface.
Example
The following example shows a unit that has an Ethernet interface defined. It is important to
know that this is the only setting that makes a unit ATM or Ethernet on the physical layer.