User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 4 of 129
FCC Notice, USA
The AB-Access units comply with Part 15 of the FCC rules. Operation is subject to the
following three conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that
may cause undesired operation.
• Units with support for an external antenna must be professionally installed.
This device is specifically designed to be used under Part 15, Subpart E of the FCC Rules and
Regulations. Any unauthorized modification or changes to this device without the express approval
of Axxcelera Broadband may void the user’s authority to operate this device. Furthermore, this
device is intended to be used only when installed in accordance with the instructions outlined in this
manual. Failure to comply with these instructions may also void the user’s authority to operate this
device and/or the manufacturer’s warranty
Conditions specific to AB-Extender:
AB-Extender complies with Part 15 of the FCC rules. The device is specifically designed to
be used under Part 15, Sub-part E of the FCC rules and regulations. Operation is subject to following
conditions:
• The device to utilize a fixed mount antenna, for use on a permanent outdoor
structure.
• The device to be installed by qualified installation/deployment personnel, and a
minimum of 25 centimeters of separation must exist between the device and
persons, when the device is operating.
• The device installers and operators should be aware of the transmitter operating
conditions, specified in the AB-Extender installation manual and other associated
user documentation, as well as the antenna co-location requirements of Part
1.1307 (b) (3), of FCC rules, pertaining to RF exposure.
• The device may not cause harmful interference.
• The device must accept interference received, including interference that may
cause undesired operation.
The device is intended to be used only when installed in accordance with instructions
outlined in this manual. Failure to comply with these instructions may void the user's authority to
operate this device and/or the manufacturer's warranty. Furthermore, any unauthorized modification
or changes to this device without the express approval of Axxcelera Broadband may also void the
user's authority to operate this device.