User Guide
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access
- RF Design and Planning
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 37 of 129
5.11
Recommended Channel Plans
The following sections will describe some pre-defined coloring schemes that will work in the
U-NII & ISM band with the AB-Access equipment.
5.11.1
Six-Sector, Three-Frequency Plan
This plan is good for Macrocells on relatively flat terrain:
• Use 1 channel guardband/separation between sectors (U-NII & ISM only)
• Use opposite polarization in opposite directions
• Use 4 meter back-to-back separation (or equivalent isolation)
• Use >1 meter separation between sectors
• Use same frequencies and sector allocations in each cell.
61
3
2
4
5
3 Frequency Reuse
d
f1
f2
f3
HP
VP
Two closest interfering sectors
61
3
2
4
5
3 Frequency Reuse
d
f1
f2
f3
HP
VP
Two closest interfering sectors