User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 15 of 129
Data Rate PCR
56 kbps 146
128 kbps 333
256 kbps 667
512 kbps 1333
1 Mbps 2667
2 Mbps 5333
5 Mbps 13333
4.5 SNMP
SNMP access has been added to AB-Access in software load 5.1.x and newer. This allows
you to monitor various parameters within the radio. Listed below are the non-standard MIB’s added
to AB-Access.
Object Name Object Descriptor AB-Access Info
snmpTotalSetVars 1.3.6.1.2.1.11.14 RSSI (only available on SU)
snmpOutSetRequests 1.3.6.1.2.1.11.27 PP processor loading (%)
snmpOutTooBigs 1.3.6.1.2.1.11.20 Channel Number
snmpOutNoSuchNames 1.3.6.1.2.1.11.9 Antenna polarization (0=H,
1=V)
snmpOutBadValues 1.3.6.1.2.1.11.22 SU distance from AP (meters)
snmpInSetRequests 1.3.6.1.2.1.11.17 # of ARP entries in the ARP
table
4.6 Rupee
There are configurations that are not covered by the upgrade scripts. Even if they are
covered, you will probably want to add settings that are specific to your network. To do this you can
edit the individual files and rupee them to the units. This is not meant to replace the upgrade script.
It is only meant to send individual configuration files to a unit.