User Guide

AB-Access Config & User Guide 5.5 Axxcelera Broadband Wireless
July 27, 2004 Company Confidential Page 126 of 129
13.2.2.2 BHS system.conf
channel 0
antenna horizontal
mode static
mid 3
bid 0
interface atm0
backoff 0
provider abw
key Axxcelera
mask 1ffff
leds debug
13.2.2.3 BHS initswitchcli
tp default UBR 70000
sp default 256 stats
add atm25m 0 769 atm25i 0 200 default default perm epd
add atm25i 0 200 atm25m 0 769 default default perm epd
add atm25i 0 300 atm25m 0 770 default default perm epd
add atm25m 0 770 atm25i 0 300 default default perm epd
13.2.3 Troubleshooting
13.2.3.1 Can’t ping the radio from the terrestrial interface
AP
1. Check all physical connections. It is a straight cable from the CS to the Switch, and a
rollover twist from the wallbox to the switch (1-7,2-8).
2. Check to see if your atmarp entries are in the ARP table on the CS. ( ./atmarp if you
are already in the /usr/local/sbin directory)
• Add an atmarp entry
root@cs1 11:11:14 (4) [~] # atmarp -s 192.168.2.50 0.0.250