Install Manual

Axxcelera Broadband Product Install Manual Page 25 of 71
Power drill Cable clips
1/8 inch drill bit Anchor sleeves
¼ inch masonry drill bit RJ-45 connectors (plastic
bodied)
3/16 inch hex (Allen) wrench
or 10 mm
Bubble level or plumb line
Adjustable wrench
Wire snake (if routing cable
through interior walls)
Crimping tool (must be
specifically matched for the
RJ-45 connector used)
Wire stripper
Small wire cutters
Punch down tool
4.3 Access Points
Table 4-2 lists the main components of an Access Point.
Table 4-2 AP Components
Item Quantity Notes
Outdoor transceiver 1 See item 1 in Figure 4-2
Mounting pole 1 See item 2 in Figure 4-2
Pole clamp 1 See item 3 in Figure 4-2
M6 washer 2 See item 4 in Figure 4-2
M3 x M10 machine thread screws 2 See item 5 in Figure 4-2
Indoor junction box 1 white wall box
Power supply and cord 1