Install Manual
Table Of Contents
- Preface
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Table of Contents
- List of Figures
- List of Tables
- AB-Access Product Overview
- Getting Started
- Base Station Installation
- Access Point Installation
- AB-Extender Installation
- Subscriber Unit Installation
- Indoor Junction Box
- Glossary
- Acronyms/Abbreviations
Axxcelera Broadband Product Install Manual Page 2 of 71
Preface
AB-Access™ System technology enables high-speed, broadband Internet access for fast data
transmission, full streaming video, real-time video conferencing, and web surfing. Axxcelera
Broadband’s wireless point-to-multipoint and point-to-point solutions (AB-Extender) for fixed
networks enables our customers to easily leap-over existing infrastructure, making the initial
investment significantly lower than that required for wired alternatives.
Axxcelera Broadband’s, patent pending, Packet-on-Demand technology delivers up to 10 times
the effective Internet data throughput of existing network configurations. Our technology
provides a last-mile solution, when deployed between networks and business/residential Internet
users. AB-Access System’s low-cost, wireless infrastructure means that a complete network can
be installed in days or weeks, instead of the typical months or years. Since AB-Access
architecture is highly scalable, our customers’ wireless network can grow as quickly as their
business grows or as bandwidth needs evolve.
The main tasks covered in this manual are configuring and managing network elements, such as
Base Stations, Subscriber Units, Access Points, AB-Extender Units, Anchor Switches, and
Control Servers. Definitions of all the terms and abbreviations used in this manual can be found
in the Glossary at the end of this manual.
Proprietary Notice
The information contained within this manual was originated by and is the property of Axxcelera
Broadband. Axxcelera Broadband reserves all patent proprietary design, manufacturing,
reproduction use, and sales rights thereto, and to any articles disclosed therein, except to the
extent rights are expressly granted to others. The foregoing does not apply to vendor proprietary
parts. To allow for the introduction of design improvements, specifications are subject to change
without notice.
Intended Audience
This guide is aimed at qualified AB-Access System installers. Installers should have experience
in radio equipment installations and aspects of hardware and software networks. Installers for
AB-Extender should be professionally qualified to install radio equipment.
Related Documentation
For more information, refer to one or more of the following documents:
• U-NII Config & User Manual – Covers AB-Access components, architectures,
configuration, and troubleshooting
• CLI Manual – Describes configuration, operational, and diagnostic capabilities of
the radios.
• AB-Access Software Release Notes – Describes updates and changes to the
latest software and known product issues.