Install Manual

Axxcelera Broadband Product Install Manual Page 17 of 71
Figure 2-1 Outdoor Subscriber Unit Components
Table 2-2 Packing List
Item Quantity Notes
Outdoor Subscriber Unit 1 See item 1 in Figure 2-1
Mounting pole 1 See item 2 in Figure 2-1
Pole clamp 1 See item 3 in Figure 2-1
M6 washer 2 See item 4 in Figure 2-1
M3 x M10 machine thread screws 2 See item 5 in Figure 2-1
Power supply 1
Power cord 1
Indoor junction box 1
2.5 Performing a Site Survey
This section explains how to select the best location for mounting the outdoor transceiver. The
steps you will perform are:
• Determine which Access Points you can communicate with.
• Determine the direction of available Access Points from the house or building.
• Select an Access Point with an unobstructed Line of Sight (LOS).
Attention! It is very important that you choose a CLEAR LINE OF
SIGHT for the placement of your Access Point Units and Subscriber
Units.
2.5.1 What You Need
• Compass (or protractor).