User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
6 CLIP_T
The CLIP_T configuration is when both the AP and SU are setup as routers. This means
that when data arrives on any interface it is analyzed at layer 3 and based on the destination IP
address is forwarded out the proper interface.
6.1 Interactive CLIP_T Eth AP
All assumptions for troubleshooting Interactive CLIP_T Eth AP will be based on the
following diagram.
RL
BL
SL
E
RL
BL
SL
E
Ethernet Switch
PC
Router
192.168.2.33 /27
192.168.2.34 /27
192.168.100.3
192.168.3.65 /29
MID 0
MID 3
192.168.2.50 /27
PVC 768
LAN
SU Data/Management PVC
Data
192.168.100.1
AP/SU Management/ Path
6.1.1 Adding AP and SU to EMS
Dialogue boxes showing the information needed to add an AP or SU are shown below.
March 10, 2003 Company Confidential Page 33 of 149