User manual

7.10 NVRAM

The NVRAM control option the configuration information. When using this menu option, The

RAID subsystem should be off-line.

NOTE: Any changes made in this group will cause data on the drives to be permanent.

Once a configuration change has been made, the NVRAM (where the settings are stored) must

be updated. If a change causes an error or if the subsystem fails, use the Erase NVRAM option

to clear the contents of NVRAM restoring the default values. In order for a change to take

effect, the RAID subsystem must be restarted. Use the Restart option to automatically reset the

RAID subsystem.