User manual

6.3 Server Configure

1. Server Information – display the following information:

･ Product Name

･ Firmware Version

･ Mac Address

･ DNS Server

･ DHCP Status

･ Baud Rate

･ Terminal Connection

2. System Settings – To configure TCP/IP status and terminal connection

IP Address Setting: To the left of the screen are the settings for the IP

address. By default the server should be using DHCP to obtain an IP address.

Port (COM1:) settings: To the right of the screen are the settings for the

terminal connection. Above should be default settings for the terminal

connection.

Mail Settings

1. Mail Information – To enable and configure the email alert function.

Access Settings

1. Account Information – To add users and configure access level for each

user. Maximum of ten users can be added.