User manual

tftp –I X.X.X.X put FW_XPT_2_0_1.ROM X1

The IP address of network port. Firmware version

5.3.3 Updating firmware by using RAIDCare Client.

1. Please refer to RAIDCare manual for proper installation of RAIDCare Client.

2. Run RAIDCare Client and search the range of IP where Network Port is located.

3. on the left click on IP address of the Network Port.

4. Click on configure, please refer to the picture below.

5. Click on the tab firmware located on the upper right hand corner.

6. Click on Browse to locate firmware on local drive.

7. Click on Update.