User manual

4.8 RS232 Configuration setup
The RS232 Params configures the external ports of the RAID subsystem. The RAID
subsystem can communicate with a remote terminal and modem. The RAID subsystem
and the remote terminal must be set to the same communication settings (Baud Rate,
Stop Bit, Data Bit, and Parity).
4.8.1 Modem Port
Option
Set Modem Port Now
Sub-Option Setting Default Setting
Baud Rate
2400, 4800, 9600, 19200, 38400,
57600, 115200
38400
Stop Bit
1, 2 1
Data Bit
7, 8 8
Parity
None, Odd, Even None
Description: Use to specify the communication protocol between the RAID
subsystem and external modem.
4.8.2 Terminal Port
Option
Set Terminal Port Now
Sub-Options Settings Default Settings
Baud Rate
2400, 4800, 9600, 19200, 38400,
57600, 115200
19200
Stop Bit
1, 2 1
Data Bit
7, 8 8
Parity
None, Odd, Even None
Description: Use to specify the communication protocol between the RAID
subsystem and remote terminal or terminal emulation software.
The settings on the remote terminal must match the settings of the
RAID subsystem.
30