User manual

Init R5/R3 Used when configuring a disk group for RAID Level 5. During an
initial RAID 5 configuration, this is automatically executed.
R5/R3 Check Used to verify the RAID 5 configuration. This option should be
executed when initially configuring for RAID 5.
Beeper Used to turn on or off the audible alarm when an error occurs or
during an Init RAID 5, R5 Check.
Stop Modem Used to stop a Page or FAX notification from being sent. Use to stop
receiving the same Page or FAX notification after the initial one has
been acknowledged.
Expand Array Used this option to increase the disk numbers to an existing
configuration. This feature can increase the array’s capacity without
backup and restore the database.
4.5.3 Slice
Slice is used to divide the RAID capacity to several separated Slices. Maximum
8 of Slices can be set at same time.
26