Service manual

Function MP
No.
Bit
ABC
Input AE-6
Entry value
Feed rate and spindle override
Feed rate override, if rapid traverse
button pressed in "program run"
reserved
Feed rate override, if
• rapid traverse button pressed in
"manual" or
• rapid traverse button and handwheel
direction key pressed in "handwheel"
Override characteristic curve
7620
0
1
2
3

+ 0 = feed rate override inactive
+ 1 = feed rate override active
+ 0 = feed rate override inactive
+ 4 = feed rate override active
+ 0 = feed rate and spindle override in 1% increm.
+ 8 = feed rate and spindle override in 0.01% increm.,
and non-linear characteristic curve
% 1101
R H
1.0 TNC
415B/425
Machine Parameters MP 7620 08.05.95 5.2 69