Service manual

Function MP
No. Bit
A B C Input AE-6
Entry value
Cancelling 7300

0 to 7 0
- status data (S)
- TOOL data (T)
0
1
- Q-parameters (Q) 2 program end program selection
0 = SQT ---
with M02, M30, END PGM 1 = - - - - - -
2 = S Q T - Q -
3 = - Q - - Q -
4 = SQT --T
5 = --T --T
6 = S Q T - Q T
7 = - Q T - Q T
- = data are erased
Graphics display
• 3-plane display
7310*
0

+ 0 = German standard
+ 1 = American standard
0
• rotation of the coordinate system in the
machining plane
1 + 0 = no rotation
+ 2 = coordinate system is rotated by + 90°
• BLK form after datum shift
2 + 0 = BLK form will not shift
+ 4 = BLK form will shift
• display of cursor position in 3-plane
display
3 + 0 = not shown
+ 8 = cursor position shown
* accessible via code number 123
R H
1.0 TNC
415B/425/426
Machine Parameters MP 7300 - MP 7310 03.01.95 5.2 57