Service manual

User Parameters
By means of the MOD function "User Parameters" certain machine parameters can
be altered easily (e.g. adaptation of the data interface). The user parameters that are
accessible via this MOD function are determined in machine parameters by the
machine tool manufacturer.
Input Values
Input values are e.g.
- the numbers 0 and 1 to select functions, algebraic signs or the counting direction
or
- numerical values for feed rates, displacement etc.
- decimal input values that can be calculated by combining several functions (bit-
coded)
- bit patterns (selectable with %)
e.g. MP 10 : % 00111
i.e. X,Y,Z with encoder (1)
IV, V without encoder (0)
- hexadecimal values (selectable with $)
e.g. MP 7353.0: $ 0F818A0
Structure
The machine parameters are subdivided into groups.
The parameter numbers are structured such that the list can be expanded easily.
0-999 Encoders and machine tool axes: allocation, evaluation, compensation
1000 Positioning
1400 Operation with feed precontrol
1700 Operation with servo lag
1900 Integral digital speed control (TNC 425)
2000 Integral speed and current control (TNC 426 PA)
3000 Spindle
4000 Integral PLC
5000 Adaptation of the data interface
6000 3D-touch probe (general parameters)
6200 Connection of measuring touch probe or touch trigger probe
6210 Digitizing with 3D-touch probe
6500 Tool calibration with TT 110
7100 Tapping
7200 Display and programming
7330 User parameters
7350 Colours, general display and FK graphics
7400 Operation and program run
7500 Tilting the working plane
7600 Hardware
RH
1.0 TNC
415B/425
Machine Parameters Overview 08.05.95 5.1 2