Operation Manual

18
Introduction
Thank you for purchasing this AXTON quality audio component.
The AXTON automotive amplifier series has been developed for the
use with mobile sound systems using 12 Volts negative ground power
supply.
The amplifiers may be used in combination with almost any brand and
type of head unit and speakers in cars, vans, boats etc., when installed
correctly, this amplifier will produce exceptional sound results.
In order to familiarize yourself with all the special features and controlling
options of your brandnew power amplifier, we advise you to read these
instructions carefully before starting with the actual installation.
Should you have any difficulty in installing this amplifier in your vehicle,
please contact your nearest AXTON dealer.
∑ 5-Channel amplifier for powering a complete car audio
speaker system with front and rear satellites plus subwoofer
∑ PWM MOSFET high efficiency switching power supply
∑ A/B amplification technology with dedicated BJT transistors
(Bipolar Junction Transistors)
∑ Discrete solid state layout
∑ 3 pairs of RCA inputs (Front, Rear, Sub)
∑ Integrated active high-/low pass filtering with 12 dB/oct.
cutting slope
∑ Subsonicfilter for channel 5CH 20Hz / 12dB/oct.
∑ Crossover frequencies independently adjustable for front and
rear satellites and subwoofer channel from 40-240 Hz
∑ Soft start and turn-off delay circuit
∑ Automatic on/off via remote switching from head-units.
∑ Protection circuitry against D.C. offset and shortcircuits at
speaker outputs as well as amplifier overload or overheat
∑ Input level/gain adjustable from 0.2 to 9 V
GENERAL FEATURES
A
C609 Manual DE.indd 18C609 Manual DE.indd 18 15.02.2005 10:34:04 Uhr15.02.2005 10:34:04 Uhr