Operation Manual

Introduction

Thank you for purchasing this AXTON quality audio component.

The AXTON automotive amplifier series has been especially developed

for the use with mobile sound systems using 12 Volts negative chas-

sis ground power supply.

The amplifiers may be used in combination with almost any brand

and type of head unit and speakers in cars, vans, boats etc., when in-

stalled correctly, this amp will produce exceptional sound results.

In order to familiarize yourself with all the special features and con-

trolling options of your brandnew power amplifier, we advise you to read

these instructions carefully before starting with the actual installation.

Should you have any difficulty in installing this amplifier in your vehicle,

please contact your nearest AXTON dealer.

GENERAL FEATURES

AXTON C208 / C408 / C508

∑ PWM MOSFET high efficiency switching power supply

∑ A/B amplification technology with dedicated BJT transistors

(Bipolar Junction Transistors)

∑ Discrete solid state layout

∑ Operating mode switchable between fullrange and highpass or

lowpass amplification respectively

∑ Integrated active high-/low pass filters with 12 dB/oct. cutting

slope for satellite or subwoofer operation continuously adjustable

from 40-240 Hz

∑ Soft start & turn-off delay circuit

∑ Automatic on/off via remote switching from head unit

∑ Comprehensive protection circuitry against D.C. offset and

short-circuits at speaker outputs as well as amplifier overload

or overheat

∑ Input level/gain adjustable from 0.2 to 9 V

C208 408 508 Manual UK-D-F 23.07.2003 19:30 Uhr Seite 22