Operation Manual

– 12 – – 13 –
– 12 –
2. CONNECTIONS & CONTROLS
2.1 REAR PANEL CONNECTIONS
1 ”+12V” POWER INPUT TERMINAL
Power input terminal to connect the active sub to the positive +12V power wire connected
to the car battery
2 ”REMOTE” INPUT TERMINAL
Terminal to connect the active sub to the automatic antenna or amp (remote) turn-on /
turn-off lead of the head unit
3 “GND” POWER INPUT TERMINAL
Power input terminal to connect the amplifier to the negative or ground wire connected
to the chassis of the vehicle
4 ”FUSE TERMINAL”
Fuse terminal equipped with a 20A ATC fuse, to protect the internal amp electronics of
the active sub
5 ”HIGH LEVEL INPUT”
Port to connect the high level input plug to headunits that only offer loudspeaker outputs,
but no RCA line-level outputs
6 ”RCA LINE INPUT”
RCA input to connect the active sub to the line-out of the head-unit (sub-out)
4 5 6
2
1
3
AB20A Manual D+E.indd 12 04.08.2006 15:57:33 Uhr