Installation Instructions / Warranty Uno 38974XX1
Installation Considerations • For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber. • Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation. • This trim kit is for use with volume control roughs 15974181 and 15977181. • The rough valve must be installed, and the finished wall completed and made watertight before installation of this trim kit.
Installation Remove the plaster shield cap. Cut the plaster shield so that it extends ¹⁄₁₆" outside the surface of the finished wall. Seal the wall around the plaster shield using waterproof sealant. Failure to seal the wall can lead to water damage. Installl the slip coupling. Cut the slip coupling so that it extends ⅝" outside the surface of the finished wall.
Install the extension spindle. Cut the extension spindle so that it extends ⅝" outside the surface of the finished wall. Install the seal, escutcheon, nut, and glide ring. Press the handle snap connector into place. Install the snap connector screw, but tighten it only 3 turns.
Press the handle into place over the snap connector. Tighten the snap connector screw.
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B.
www.hansgrohe-usa.com US - Installation Instructions • Part No. 90844421 • Revised 08/2009 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel.
