Installation Sheet

2
English
Technical Information
Recommended water pressure 15 - 75 psi
Max. water pressure 145 psi
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 176°F*
Flow rate 1.5 gpm
Hole size in mounting surface
spout 1⅜"
valve 1¼"
Max. depth of mounting surface 1⅝"
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Tools Required / Outiles Utiles /
Herramientas Útiles
43 mm
24 mm
19 mm
10 mm
2 mm
3 mm
Petroleum-based plumbers putty may damage some sink
materials. Please refer to the instructions included with
the sink regarding acceptable sealants.
Le mastic de pétrole-basé peut endommager la surface
de quelque baignoires. S'il vous plaît consulter le
fabricant du baignoire quant aux enduits d'étanchéité
acceptables.
Masilla de petróleo-basó puede dañar la superficie de
algún bañeras. Consulte por favor al fabricante del
bañera con respecto a selladores aceptables.