Installation Guide

2
Technical Information
Showerhead flow rate max 2.5 GPM
English
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
27474xx1
27422xx1
27412xx1
½"
⅜"
9⁷⁄₁₆"
2⅜"
2
6
°
2
6
°
27476xx1
27479xx0
27413xx1
27493xx1
28494xx1
28484xx1
½"
⅜"
1¾"
6⅞"
2
6
°
2
6
°