Installation Instructions / Warranty Massaud 18471181
Rough for Axor Massaud Tub Spout 18471181 18471181 18473001 (not included) Installation Considerations This rough is required for installation of Axor Massaud tub spout 18473001. It can be installed with the inlet port facing upward or facing downward. The rough incorporates screwing-in flanges, so that it may be fastened to a header board, if desired, for additional support. The inlet port is 3/4” NPT.
Install the finished wall surface material so that it is against the plaster shield. The plaster shield will remain on the rough after installation. Do not remove it. Replacement Parts 1 18 x 2 o-ring 96492000 1 Limited Lifetime Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”).
negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no-rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. (3) Conditions in the home such as excessive water pressure or corrosion. C.
