Installation Sheet

6
Turn the water o at the main (1).
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛" from
the nished wall surface (2).
Seal the wall around the plaster
shield with waterproof sealant.
Failure to seal the wall can lead to
possible water damage.
Remove the label.
Remove the ush insert screw using a 5 mm Allen
wrench.
Remove the ush insert and seal.
Insert the function block.
Install and tighten the function block screws using a 4
mm Allen wrench.
English
Installation