Installation Guide

7
Install the transfer valve trim
Screw the sleeve down onto the transfer valve.
Push the handle over the stem and secure it with the
screw.
Line up the locator tab on the screw cover with the
notch in the handle. Press down firmly.
Install the handles
Carlton/Phoenix/Terrano
Screw the escutcheons down over the mounting
plates.
Position the handle over the valve with the lever or
cross in the desired off position. Hold the lever or
cross steady with one hand. With the other hand,
rotate the “bell clockwise, so that it threads down over
the valve.
Uno / Steel
Install the white plastic snap connectors and screws
on the valves.
Screw the escutcheons into place over the mounting
plates.
Position the handle over the valve. Press downward
firmly, so that the handle snaps into place over the
snap connector.