Installation Sheet

12
English
Installation
Install the noise reducers.
Install a header board to support the rough.
Hold the rough against the header board at the
installation position.
Make sure that the rough is level.
Mark the positions of the screw holes.
5"
4¼"
2⅜"
4"
2⅜"
⅜"
1
2
1
2
To insure correct fit of the showerhead, the outside
surface of the finished wall must fall between the
"min" and "max" markings on the plaster shield.
If installing with mounting plate 10973180,
please turn to page 20 .